Kawasaki Ninja Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi all, new to the forum and wanted to share. Upgrades so far:
-cut down puig double bubble windscreen
-ako racing led integrated tail light
-m-2 vale two brothers slip on carbon fiber exhaust
-smoked turn signals
-sport bar kit
-custom fender eliminator
-painted all grey fairings flat black
- more to come
-bi-xenon hid led halo head lights,
 

Attachments

·
Registered
Joined
·
15 Posts
Discussion Starter · #4 ·
Measured it out with a silver sharpie tied to some string and a dremel. If you want to do it yourself, pick a spot on the bottom center of the screen, pin the end if the string with your thumb and use the natural curve of the string to make your base line. Then, if you want, you can move your thumb up the screen and use the same method to play with the curve. You have to be pretty accurate with the dremel. Sand it down after cutting and your done.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top