Kawasaki Ninja Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
234 Posts
i have neons on my bike. I installed the lights then ran them to a kill switch which on the "gauge" plastic area. The switch goes to the battery and the lights. When the switch is off the lights get no power / no drain. There is a Youtube video of a guy doing this with red lights that breaks it down really good step by step (dont remember the name)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top