Kawasaki Ninja Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I was out on a ride a week ago and noticed my bike got REALLY loud ( about twice as loud as I was use to)
Got the bike home and found out the silencer/baffle was gone. It must have popped out. Anyhow it's an aftermarket Yoshimura. There doesn't seem to be any markings or part numbers on the exhaust (I'm the second owner) any idea how I can get a new one?

New Ginger Ninja
 

·
Premium Member
Joined
·
4,253 Posts
Either contact Yoshi directly, or your local Yoshi Distributor. They should be able to help you out pretty easily.
 

·
Moderator
Joined
·
1,465 Posts
Agreed. The first step is to see which pipe you have. Go to the website and look for the exhaust you have. Secondly get in touch with Yoshimura directly. They may warranty repair it for free with your mailing it. I've seen it done before. Since the open it. They usually will repack it as well. Making it a like new pipe again performance wise if that silencer is the rivet in/ weld in type. Then again they may do nothing but start there for sure
 

·
Premium Member
Joined
·
4,253 Posts
If it's like mine, the silencer is removable without dismantling the slip on. It's only held in place by a grub screw, which I recommend you Loctite in next time!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top