Kawasaki Ninja Forum banner
1 - 20 of 96 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
Hey guys this weekend i installed the LED kit. My bike is black and i decided to go with red for the alternative so i got the rim stripes red and the led it. It was EXTREEMLY easy i believe the hardest part would have been removing the farings ( which was a piece of cake) the person who i bought it from was extreemly helpful so if anyone want to buy it here is the link

http://ledaccentlights.net/store/index.php?main_page=index&cPath=8.

We ordered 3 sets and he did not charge us for shipping. I am sorry i do not have pictures to show u guys cuz my freinds camera is extreemly shitty. We are working on his bike tonight or tomowwor and we will try to get pics asap of the installation. It is really a trial and error game where you see where you think the most light would be projected. If worse come to worse ill take off my ferrings and show you where i put it. Anyway the one i bought was 10 pods 45$ self installion and it was worth it. I got alot of attention . . . none from cops which is good. Hopefully by 2nite or tomorrow i ll have the pics so you guys be the judge and tell me.

PS- If you do install it take reflective tape and put it on the ferrings and this will magnify the projection of the light 10 folds.
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #3 ·
Right here on the Left hand corner. I put it in a place where it is not really that open to the public and hidden.

This place it was easy to drill a hole and it is really out of sight


The place where i indicated on this picture is not the exact location. Since this is the best picture i could find to show it to you. In reality it is further up in that vercinity tho. Hope you get the idea and hope that picture was helpful
 

Attachments

·
Registered
Joined
·
3 Posts
I just ordered the 10 pod kit and I can't wait to get it in. Where did u find were the best places to place the led lights? I'm wondering if I want to sacrifice 2 of the pods to put on the bottom of the bike to make an underglow effect.
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #7 ·
This weekend i am installing the FLUSH mounts so i will be taking the fearing appart and i will show u guys where i put it. Basically without any pictures i put 3 pods on each side of the fearings. I put 2 towards the bike right by the read break fluid and 2 in the front. I wanted the main focus to be at the center. This weekend i shall def get u pictures on where i mounted it. But like i said its more of a trial and error basis to see what and where you think it looks nicest. Btw felix i was goign to go for the green but then i realized too late so i did red insted. On the black bike every color looks nice.

Sorry guys i know it really does not help much without pictures but this weekend fri or sat i ll hav all the pics up for u
 

·
Registered
Joined
·
278 Posts
dspring said:
I just ordered the 10 pod kit and I can't wait to get it in. Where did u find were the best places to place the led lights? I'm wondering if I want to sacrifice 2 of the pods to put on the bottom of the bike to make an underglow effect.
if ur gunna be doing that...yes do the underglow! it will look cool
 

·
Registered
Joined
·
646 Posts
Take pictures and post a full write up please, With advice and how you attached them to the bike.
I'd really like to do this to my Ninja and my Virago. :p
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #12 ·
Take pictures and post a full write up please, With advice and how you attached them to the bike.

The pods have 3M tape on the bac of it so there is nothing much about attaching it. You peel off the cover and attach it w/e u think it would project the most light. I concentrated most of my pods on mid section and the light will project from the gaps of the fearings and does project on to the ground.
 

·
Registered
Joined
·
32 Posts
What color you guys think would go nice on the classic 250 RED?

White?

Stockwall....what do you think? Since you are the one that says red is the fastest :)
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #14 ·
With red you can do couple of colors. Obvious would be white but i think you can go with blue as well. Think blue would look nice as well just my opinion
 

·
Registered
Joined
·
646 Posts
Ordered the 20 LED harness for my Virago, Can't wait to get them and whack them on for ultimate "What the fuck was I thinking" effect.
 

·
Premium Member
Joined
·
6,846 Posts

·
Premium Member
Joined
·
649 Posts
subiedriver07 said:
What color you guys think would go nice on the classic 250 RED?

White?

Stockwall....what do you think? Since you are the one that says red is the fastest :)
White for sure. White makes the Red bike go even faster.
 

·
Registered
Joined
·
646 Posts
Just the website linked on page one, Got the 20 led yellow harness kit :p Should look pretty good on the Virago, Once I put handle bar streamers and what not on it as well. :p
 
1 - 20 of 96 Posts
Top