[VengeanceB4U]

Hi all. Does anyone else have a throttle delay when going to take off in first gear? When I engage the clutch & the bike starts to go, it seems that it kind of stalls for a second before the bike really takes off. It does this even after it's warmed up. Am I doing something wrong? Thanks!

 

[jtgrenier]

My first thought is this; you might be letting the clutch too far out before engaging your throttle.

 

[VengeanceB4U]

Thanks! So I should throttle up a little more before engaging the clutch.

 

[Blue Ghost]

Thanks! So I should throttle up a little more before engaging the clutch.

For a smoother quicker launch between 2500 and 3000 is good. The bike won't get loose on you.

 

[spooph]

Ding Ding! THe 250 has no powa! Yes, I usually ride the clutch till about 4,000rpm's or so from a stand-still..

 

[VengeanceB4U]

Thanks so much guys!! I'll try that out today!! Lol, " but captin, we dawn't ave da powa'. Warp speed captain Zulu. "

 

[CoinSlot]

If that doesn't fix your problem and you feel like it needs a little more power from low down then you can always shim your needles. I did it myself from a DIY on here.