Kawasaki Ninja Forum banner
1 - 1 of 1 Posts

· Moderator
Joined
·
1,465 Posts
Sounds like your bearings in the front end are your problem being you can turn either way. One is probably bad not all of them. But you should change all if that is your problem. You can ebay a service manual that will tell you how to check them and what the torque values when re-installing the front end. Its really not that hard. Just take your time. And you will be fine.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top