Kawasaki Ninja Forum banner
1 - 20 of 22 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·

·
Premium Member
Joined
·
4,247 Posts
Bugger!! They only do the older model 650R!!! BOOOO!!!!! :p

I found a seller in Hongkong that does very similar levers and about the same price! they may be on the wish list later on!!
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #5 ·
Done. I've now heard a few good reviews from guys here in Bris. I'll get a set & see how they go.

Felix, I'll do a 'before & after' speed test & let you know what sort of improvement they make ;)

Zandit, I'm sure they'd do up a set for your bike if you enquire. But if you have already sourced some similar ones I guess there's not much point.
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #7 ·
Let us know how you go. Surely they would have to make some for the baby ninja! Especially given some of the other bikes they supply for.

My pics should be uploaded in about 2 weeks :D
 

·
Premium Member
Joined
·
4,247 Posts
Would be interesting to see where the value difference is, are the pazzo's that much better??
 

·
Premium Member
Joined
·
6,846 Posts

·
Premium Member
Joined
·
4,247 Posts
Yeah, no doubt they are a straight copy, all of the hard work is already done by Pazzo.
 

·
Registered
Joined
·
1,480 Posts
Sometimes I wonder if companies put out two of the same product. One with a brand name and one without. Auto companies do it all the time. They sell "OEM" parts made by other companies, slap their logo on it and sell it for $100's more. Why not take your product to china have it made cheap, sell it under a plain brand and still make a profit. You stick it to those who only by original and sell to everyone else still at a profit. Win/win!
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #15 · (Edited)
So, I finally received and installed the new levers. Decided to give these ones a try:
[URL="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320549800493&viewitem=&sspagename=STRK%3AMEWNX%3AIT"][URL="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320549800493&viewitem=&sspagename=STRK%3AMEWNX%3AIT"][URL="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320549800493&viewitem=&sspagename=STRK%3AMEWNX%3AIT"][URL]http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320549800493&viewitem=&sspagename=STRK%3AMEWNX%3AIT[/URL][/URL][/URL][/URL]
Cost me about AU$50 delivered to my door. Here's what finally turned up on Tues afternoon:

Compared to the standard ones: *note the nut with part of a bolt stuck in it. I snapped it while replacing the brake lever. Have ordered a new one and it will about $10.

Before:

After:

Before:

After:

Before:

After:

 

·
Registered
Joined
·
173 Posts
Discussion Starter · #20 ·
About 2 weeks. But there were also about 5 public holidays in that time so it was quite fast really.
And Felix, you might be happy to know that I have been using them for 4 days now (even with a broken pin) and they are holding up well. No snapping at all. ;) They actually look and feel like very good quality. And it could be all in my head but, since adjusting both levers correctly my gear changes feel a lot smoother.
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top