Kawasaki Ninja Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Hi peeps! I just bought a set of arrow head turn signals for my 2011 250. It should be a simple install but I'm concerned about the bulbs that comes with these new signals. The new bulbs are 23 watts as compared to the original 10 watt bulbs, should I be able to use these as is or will I have to get lesser watt bulbs? Should I need any other modifications to accommodate the 23 watt bulbs? Thanks all!
 

·
Registered
Joined
·
5,695 Posts
You'd stay on the safe side if you replaced the bulbs with the 10w stock version, as long as they fit. I can't remember off the top of my head if the circuit will take the extra wattage and am a bit busy ATM to figure it all out.... Eric? Racer X? Some of the gurus should be able to point you in the right direction.
 

·
Registered
Joined
·
3,026 Posts
no harm would come from buying yourself a set of 10w bulbs just to be on the safe side until someone comes a long to work it all out.

Never done any light mods on the 250 so i woulnt know =/
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #4 ·
Thanks!

Thanks guys! It's always better to be safe than sorry so I'll see if I can get 10 watt bulbs for these arrow heads. They just came in today & they look great!! It cost about $32.00 total for all four turn signals, not too bad. I'll check to see if they fit (hopefully) with no modifications. Pics to follow as soon as I get everything worked out. BTW......I LOVE MY NINJA!!!!!:)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top