Kawasaki Ninja Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,480 Posts
Discussion Starter · #1 ·
Air Filters for the 2013 Kawasaki Ninja 300
This is a list of available air filters for the Ninja 300. Theses filters also fit the '08-'12 Ninja 250R. This may not be an exhaustive list. Feel free to post others that you may know of or use.

Drop-in Type

OEM Kawasaki Air Filter- Kawasaki P/N: 11013-0020

WIX- P/N: 49721
This is a Dual Stage foam filter. [1]

K&N Air Filter- P/N: KA-2508
K&N Stock Replacement Air Filters allow engines to breath more efficiently, and are the first step to getting more horsepower from your bike. These filters use pleated, multi-layer surgical cotton mesh to deliver the best air cleaning qualities and the highest air flow rate. No rejetting is required with a stock muffler
BMC Air Filter - P/N: BMC-FM551-04
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. BMC air filters, made in cotton, minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore, the benefits of replacing the original paper filter with a BMC cotton air filter in your motorcycles are evident.
JFC Performance Filter
Sportisi Motorsport is the EXCLUSIVE sole distributor for JFC Drop in air filter for the NINJA 250R. This product is an instant PERFORMANCE INCREASE without any jetting changes required on a standard bike.
UNI Air Filter- P/N: NU-2303
•Higher airflow for higher performance •Fits in stock airbox exactly like OEM filter •Longer service intervals •Cleans easily with grease-cutting dishwashing detergent; just clean, re-oil and reuse indefinitely •Stop more dirt than paper filters
DNA Air Filter- P/N: P-K6S07-0R
This new DNA filter is designed to replace the stock foam filter without any modifications. This DNA filter features a very large filtering area, combined with 4 layers of High quality DNA Surgical nafta cotton, impregnated in DNA Special air filter oil.
Pipercross Performance Air Filter- P/N: MXP166
Pipercross foam is the secret to a lightweight, long life performance air filter. Pipercross air filters consistently outperform paper and cotton-gauze rivals to supply air to the engine - even when dirty. This is thanks to the multi-laminate construction used in every Pipercross performance air filter. Layers of varying porosity foam all work together to trap different sized particles. Pipercross have developed the perfect combination of filter density and thickness of each layer. Where Pipercross filters are impregnated with the dirt retention additive, the filtration performance is greater enhanced - the additive helps the foam to swell, opening pores whilst providing a "sticky" layer to hold more dirt. See the review of this filter [2] Pipercross Performance Air Filter for the Kawasaki Ninja 250R

Note: Most filters will flow air better than the stock OEM Filter. may offer small performance gains.
 

·
Registered
Joined
·
9,088 Posts
I'm still looking for a K&N for my 2012 650......:facepalm::facepalm:
sure wish i could make it so i didn't have to remove the tank everytime i want to service it too...:dance::dance:








 

·
Registered
Joined
·
1,480 Posts
Discussion Starter · #4 ·
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top