So, after many years of riding a stock ZRX, I have made a few mods to it. The latest one is to mount a set of gauges from an 86 ZX 900. I had to fab a bracket to mount them and re-pin the connector. The only issue is that the tach reads about double what the engine is actually turning over at. ( 5th gear at 55 mph indicated the tach is showing almost 6 k rpm). What I need to know is how the ZX 900 ICU measured the rpm. Is there a way to step down the signal that the ZRX ICU sends to the tach? Ideals anyone?
|All times are GMT. The time now is 01:16 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.