Looks great.  Black stripes and turn signal mods look great too.

We need night pics for the front! Looks really nice. Kind of like the Audi lights.

That looks awesome, buddy, and I really love the stripes, gives me new inspiration to finish off my bike

A+ work, love the black strips on the bike along with everything else, nice work!

Thanks to all  .

BlackBoar, Zandit, Crispy, the stripes concept was drawn to look like this from the side :



I wanted the sticker to be something simple, bold, not taking away the already nice design of the bike but just to highlight it a bit. Most of my friends would go with sticker design that almost camouflage the bike, but this is not quite my concept.

These are the 2 stickers I used, the textured black and the reflective for the head light:





Spooph, Sorry I don't have pics while the mod was taking place. Simply I was too consumed with the mod work itself but I am sure I can share it in the modification section for those interested in doing similar mod.

I got the led strips from VIrtualVillage.com , using the 12 cm leds (12 bulbs) on each side seemed to be what I needed. These are only $2.99 each excluding shipping charge. They have led strips in longer dimensions as well as different colours.





The led turn signals I obtained from motoworld.com in Singapore. Not to forget to change the flasher relay to an electronic flasher to make the turn signals blink properly without the use of any resistor because using resistors will work but also consume additional power so there is not much power saving which I would rather provide for the combustion.

And for the rainy season here, I puchased a deck cover for scooter and customize it for use on the ninja to protect the engine and exhaust pipe from getting dirty quickly.



Here is how it looks when installed:



Last, I modified the left switch to include a high/low beam switch for quick beaming during day/night time. unfortunately the one fits perfectly comes in yellow colour.



May be this will give you guys somethin else to add to your ninja list 

Thanks mate !

Oh just noticed my camera is doing it again, when its battery runs out the dates are all wrong.

Anyway, I find that I used the high/low beam quite often thus I am glad I did this mod.

Next I need to work on the heat-shield on the stock muffler. My right foot got burned twice touching the shield  it was hot, not much shielding against the heat. May be I wil try using teflon mounting to isolate the heat from transferring to the shield 

thats a good idea felix!